HiOSO Technology Co.,Ltd is one of the leading 4fe +1fx managed media converter manufacturers, equipped with productive factory, welcome to buy and wholesale 4 ports managed media converter, 4fe 100m + 1 fiber 100m managed media converter, 4rj45 100m + 1 sc 100m managed media converter products from us.
Overview
HiOSO FC650M is a kind of 10/100Mbps adaptive fast Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port 10/100Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal.
FC650M can extend the transmission distance of a network from 100m over copper wires to 100Km (single-mode full-duplex mode). This type of fiber converter supports two types of network connection medium: 10/100Base-TX and 100Base-FX. FC650M can implement data transmission between two types of network connection medium. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
Adaptive 10/100Mbps Ethernet network, for the convenience of network upgrading;
Efficient built-in switching core, to implement flow control and reduce broadcast packets;
Providing four independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
Supporting full-duplex and half-duplex transmission modes and capable of automatic negotiation;
Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
802.1Q tag based VLAN(up to 4 VLAN)
IGMP snooping V1 V2
WEB management
Cisco-like CLI interface
Traffic Management and Qos
802.1p 4 egress priority queues
Rate limiting
Configurate IGMP snooping time and priority
Supporting Spanning Tree Protocol (STP) to form a redundant network;
Low power consumption, low heat and capable of stable operation for a long period time;
Supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps Ethernet long-distance transmission network
Pictures
External power
Technical Specifications
Parameter |
Specifications |
Access mode |
10/100Mbps |
Standard |
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
Wavelength |
850nm/1310nm/1550nm |
Transmission Distance |
Dual-fiber multi-mode: 2Km; Dual-fiber single-mode: 25/40/60/80/100/120Km;
Single-fiber single-mode: 25/40/60/80/100Km |
Port |
Four RJ45 connector:connected to STP/UTP category-5 twisted pair |
Conversion mode |
Medium conversion, storing and forwarding |
MAC address table |
I K |
Buffer space |
1Mbit |
Flow control |
Full duplex state: flow control; half duplex state: back pressure mode |
Delay |
9.6us |
Bit error rate |
<1/1000000000 |
MTBF |
100,000 hours |
LED |
POWER (power), FX LINK/ACT (fiber connection/action) |
Power |
DC5V/1A (external) |
Power consumption |
2.5W |
Operating temperature |
-10~55°C |
Operating humidity |
5%~90% |
Storage temperature |
-40~70°C |
Storage humidity |
5%~90% (non-condensing) |
Dimensions |
26mm(Height)*104mm(Width)*119mm(Depth) (external power) |